Spartech International

A medium heavy coated rutile type good running Hard Facing Welding Electrodes, deposit a tough air hardening type of weld metal of approximately 350 to 600 BHN hardness.

The weld metal is machinable and recommended for application involving maximum hardness as required.

Typical applications suitable for shear blades brake shoes, coupling, conveyor parts, roller tractor wheels, steel casting, shafts, and axles.

Uses
Hard Facing Electrodes are used for all kinds of gears, shafts, hammers, pulleys, couplings and spindles.

Sr. No.

Type

Make

Application

Size mm

Photo

1

Hard Facing
HF 250 R

ADOR,ESAB,D&H,
BOHLER,OERLIKON

Shaft, Journals, Gear Teeth

3.20×450

4.00×450

5.00×450

2

Hard Facing
HF 350 R

ADOR,ESAB,D&H,
BOHLER,OERLIKON

Similar application requiring higher hardness.

2.50×350

3.20×450

4.00×450

5.00×450

3

Hard Facing
HF 650 R

ADOR,ESAB,D&H,
BOHLER,OERLIKON

Crusher jaws, Bucket Teeth, Pulveriser Hammer Cement Mill, cane cutting Knives & Hammer

2.50×350

3.20×450

4.00×450

5.00×450

4

Hard Facing
HF 250 LH

ADOR,ESAB,D&H,
BOHLER,OERLIKON

Shaft, Journals, Gear Teeth

3.20×450

4.00×450

5.00×450

5

Hard Facing
HF 350 LH

ADOR,ESAB,D&H,
BOHLER,OERLIKON

Similar application requiring higher hardness.

2.50×350

3.20×450

4.00×450

5.00×450

6

Hard Facing
HF 650 LH

ADOR,ESAB,D&H,
BOHLER,OERLIKON

Crusher jaw, Bucket Teeth, Rock crusher Hammer, Ploughs, Cane Cutting knives, & Hammers, Cement mill Hammers.

2.50×350

3.20×450

4.00×450

5.00×450

7

ROLLER FACING ELECTRODES

ADOR,ESAB,D&H,
BOHLER,OERLIKON

Sugar Mill Rusher Teeth.

4.00×450

We offer a wide range of M S Electrodes with light, medium, medium heavy and heavy coated electrodes, which are used for major and minor structural work. As the name suggests, these electrodes are made for mild steel and are suitable for all welding positions. These electrodes weld the metal, which is of radiographic quality with smooth arc and low spatter.

Uses
MS electrodes are most commonly used for out-of-position welding such as field construction, ship yards, water towers, pressure vessels, pressure pipes, steel castings, plain and galvanized steel storage tanks, etc.

Sr. No.

Type

Make

Application

Size mm

1

E6013 ER4211X

(6013 plain)

Ador, ESAB , D&H , BOHLER, Orlikon

All position medium coated rutile electrode with excellent usability characteristics for producing radiographic quality welds. Can be used for pipes & tubes up to 12 mm thickness.

2.50×350
3.15×350
4.00×450
5.00×450

2

E6013X ER4211X

(6013 "s" x-ray quality)

Ador, ESAB , D&H , BOHLER, Orlikon

All position medium coated rutile electrode with excellent usability characteristics for producing radiographic quality welds. Can be used for pipes & tubes up to 12 mm thickness.

2.50×350
3.15×350
4.00×450
5.00×450

3

E6013XXER4121X

(6013"ss" boiler quality)

Ador, ESAB , D&H , BOHLER, Orlikon

A heavy coated all position rutile electrode for deposing heavier welds. Would be useful for application where slower cooling rates are required.

2.50×350
3.15×350
4.00×450
5.00×450

4

E7018 EB5426H3JX

(7018-low highdrogen)

Ador, ESAB , D&H , BOHLER, Orlikon

Basic Coated low hydrogen iron powder all position electrode for giving radiographic quality welds subjected to resistant. Resists hot & cold cracking. Weld is strong ductile & though. Suitable for components subjected to dynamic loading. Can be used for pressure parts particularly in thermal plants Metal recovery 115%.

2.50×350/450
3.20×350/450
4.00×450
5.00×450

5

E7018-1 EB5629H3JX

[7018-1(7018 spl)]

Ador, ESAB , D&H , BOHLER, Orlikon

Basic Coated low hydrogen iron powder all position electrode for giving radiographic quality welds resistant hot & cold cracking. Welds is strong, ductile & tough down to 45oc. Suitable for components subjected to dynamic loading & pressure parts.

2.50×350
3.02×450
4.00×450
5.00×450

6

E7016 EB5426H3X

Ador, ESAB , D&H , BOHLER, Orlikon

Basic coated low hydrogen iron powder all position electrode for giving radiographic quality for joints subjected to resistant. Suitable for pipe welding application. Metal Recovery Around 100%.

2.50×350
3.15×450
4.00×450
5.00×450

Nickel Electrodes are often used in severe service conditions where extreme heat, corrosion, abrasion, high pressures and combinations of these conditions are present. We produce many grades of nickel, nickel alloy and Copper/Nickel coated electrodes for Arc Welding.

Nickel Electrodes
The flux coating contains various minerals and alloy powders to impart specific welding characteristics and deposit chemistries. Most Nickel base electrodes are produced to the requirements under AWS classification.

Our Range
E-Ni1
E-NiCr3
E-NiCu7
E-NiCrMO10
E-NiCrMO3
E-NiCrMO4
Packaging as per ISO Standards

Tungsten Electrode
Name of Material		Chemical Composition (Percentage by Weight)
W	(pure)	> 99.97
WT	WT20	2.0 % ThO2
WLZ		2.5 % La2O3 / 0.07 % ZrO2
WL	WL10	1.0 % La2O3
	WL15	1.5 % La2O3
	WL20	2.0 % La2O3

All variety of Tungsten Electrode are packed 10pcs. We cater to your welding requirements of Tungsten Welding Electrodes in the form of Winner Tungsten Welding Electrodes and Plansee Tungsten Welding Electrodes Esab Stainless Steel Electrodes

We provide Stainless Steel Electrodes. Following are the ranges for the same.
Sr. No.	Brand	AWS	Application	Photo
1	OK 61.50	A5.4: E 308-16	OK 61.50 finds extensive use in fabrication of austenitic stainless steels of 18Cr 8Ni type corresponding to AISI types 301, 304 and 308.
2	OK 61.30	A5.4: E 308L-16	OK 61.30 is especially designed for welding austenitic stainless steels corresponding to AISI 304L, 304, 308L, 308,
3	ESAB 304B	A5.4: E 308L-15	ESAB 304B is mainly used for welding stainless steels having a corresponding chemistry with high ductility and high impact values at low temperature cryogenic
4	OK 61.80	A5.4: E 347-16	OK 61.80 finds extensive application for welding of stabilised version of 19Cr/10Ni type steels corresponding to AISI 321 & 347
5	ESAB 308H	A5.4: E 308H-16	Esab 308H finds wide use in the fabrication of components made out of AIS 308H type steels that are used for their high tensile strength
6	OK 63.30	A5.4: E 316L-16	OK 63.30 is especially designed for the welding of 18Cr/13Ni/Mo type steels corresponding to AISI 316 and 316L, 317 type stainless steels.
7	OK 63.3	A 5.4: E 316L-15	OK 63.35 is mainly used for welding stainless steels having a corresponding analysis, but can also be used for welding certain air hardening steels
8	OK 63.80	A5.4: E 318-16	OK 63.80 is especially designed for the welding of Ti and Nb stabilized stainless steels with similar base composition corresponding to AISI 316 and 318 types.
9	OK 67.67	A 5.4: E 309-16	OK 67.67 is designed for applications requiring high strength and corrosion resistance at high temperatures upto 1100°C; for e.g. welding of heat resistant chrome steels
10	ESAB 309	A 5.4: E 309-15	ESAB 309 is specially designed for the welding of AISI 309 type steels, straight chrome steels dissimilar steels
11	OK 67.60	A 5.4: E 309L-16	OK 67.60 is essentially used for welding heat resistant straight Chrome steels and Cr-Ni alloyed steels
12	OK67.70	A 5.4: E 309Mo-16	OK 67.70 is especially designed for welding of acid resisting clad steels and stainless steels to other types of steels
13	ESAB 309Mo	A 5.4: E 309Mo-15	ESAB 309Mo is especially suitable for welding of stainless steels where better toughness is required compared to the rutile based electrodes of the same class.
14	ESAB 309LMo	A 5.4: E 309LMo-15	ESAB 309LMo is used for the welding of 316 type clad steels as well as for joining and as a buffer layer in welding of dissimilar metals
15	ESAB 430	A 5.4: E 430-15	ESAB 430 is designed for welding AISI 430 stainless steels and steels with similar composition.
16	ESAB CHROMWELD G		Chromweld G is specially designed for welding of High strength steels of unknown omposition and also suitable as a cushioning layer prior to hard surfacing.
17	ESAB CHROMWELD G (Spl)		ESAB Chromweld G Special is designed for welding of high strength alloy steel and dissimilar joints.

Tungsten is the only metal that can meet the high physical and mechanical requirements. Tungsten has the highest melting point of all metals, a low vapor pressure, low thermal expansion, good thermal conductivity and a low electron work function. Tungsten Welding Electrodes are widely used because they make good welds and are long lasting and quite easy to use. A throated tungsten electrode operates at a temperature well below its melting temperature compared to a pure tungsten electrode. This results in a much lower rate of consumption of the electrode during welding, which eliminates much of the “arc wander” associated with balled pure tungsten. Other reasons for their use include easier arc initiation, reduced weld metal contamination, higher current- carrying capacity, the ability to sharpen the electrode, and long life.
Name of Material		Chemical Composition (Percentage by Weight)
W	(pure)	> 99.97
WT	WT20	2.0 % ThO2
WLZ		2.5 % La2O3 / 0.07 % ZrO2
WL	WL10	1.0 % La2O3
	WL15	1.5 % La2O3
	WL20	2.0 % La2O3

All variety of Tungsten Electrode are packed 10pcs. We cater to your welding requirements of Tungsten Welding Electrodes in the form of Winner Tungsten Welding Electrodes and Plansee Tungsten Welding Electrodes.