ER – 4043 (NG – 21)

TIG: 1.8, 2.0, 2.4, 3.6, 4.0

MIG: 0.8, 1.2,1.6

For welding 3003,3004,5052,6061, 6063 and casting alloys 43, 355, 356 and 214.

ER – 4047 (NG – 12)

TIG: 1.8, 2.0, 2.4, 3.6, 4.0

MIG: 0.8, 1.2,1.6

For welding 1060, 1350, 3003, 3004, 3005, 5005, 5050, 6053, 6061, 6951, 7005and cast alloys 710.0 and 711.0.

ER – 5356 (NG – 6)

TIG: 1.8, 2.0, 2.4, 3.6, 4.0

MIG: 0.8, 1.2,1.6

For welding 5050, 5052, 5083, 5356, 5454, 5456. Provides much better corrossion resistance to salt water.

ER – 1100 (NG – 1B)

TIG: 1.8, 2.0, 2.4, 3.6, 4.0

MIG: 0.8, 1.2,1.6

For architectural or decorative application. For welding 1100, 3003, 3003 to 1060, to 1080, to 1350.

ER – 5183

TIG: 1.8, 2.0, 2.4, 3.6, 4.0

MIG: 0.8, 1.2,1.6

It is most frequently used on 5083 base plate. It is also used to weld 6061, 6063, 5086, 7005 and 7039 alloys

ER – 70S 2

TIG: 1.6, 2.0, 2.4, 3.2, 4.0

MIG:0.6, 0.8, 1.2, 1.6

For welding of mild and 490 N/mm2 steel. Espeically suited for root pass of pipes, offshore rigs and structural

ER – 80S B2

TIG: 1.6, 2.0, 2.4, 3.2, 4.0

MIG:0.6, 0.8, 1.2, 1.6

It is designed for welding on 1-1/4 Cr

½ Mo steels

ER-80S-B8

TIG: 1.6, 2.0, 2.4, 3.2, 4.0

MIG:0.6, 0.8, 1.2, 1.6

For welding of 9% Cr-1% Mo steel

ER-80S-B6

TIG: 1.6, 2.0, 2.4, 3.2, 4.0

MIG:0.6, 0.8, 1.2, 1.6

It is designed for welding of material of similar composition for high temperature service conditions.

ER-80S D2

TIG: 1.6, 2.0, 2.4, 3.2, 4.0

MIG:0.6, 0.8, 1.2, 1.6

It is low alloy steel wire with 2% Manganese and 0.5% molybdenum as alloying elements.

ER-90S-B3

TIG: 1.6, 2.0, 2.4, 3.2, 4.0

MIG:0.6, 0.8, 1.2, 1.6

It is designed for welding 2-1/4 Cr 1 Mo steels

ER-90S-B9

TIG: 1.6, 2.0, 2.4, 3.2, 4.0

MIG:0.6, 0.8, 1.2, 1.6

It is designed to weld high temperature steels for hot hydrogen services and is suitable for 9% Chromium steels such as P91 and F91.

It was developed to weld various welding stainless steels.

E71T-1 is designed for welding low carbon and mild steel, structural and pressure vessel grades. E71T-1 flux core ingredients produce a fast freezing slag that facilitates out of position welds.

It is flux Cored Wire used for welding types 301,302,304,304L, 308,308L.

It was developed for out of position welding

It is flux Cored Wire used for welding types 316 & 316L Stainless Steel.

It is designed for welding type 309 wrought or cast form, but used extensively for welding type 304 to Mild Steel

It was developed to weld type 347,304,304L and 321 stainless, where service temperature are below 600 degree F

It is an all position flux cored wire that 1M is designed for welding mild and medium-carbon steels.